DR360涂镀层测厚仪是一款应用电磁感应原理方法,按国家行业:GB/T 4956-1985标准,专业测量磁性金属材料表面涂镀层覆盖层物体厚度的专业无损检测仪器。可无损地测量磁性金属基体(如:钢、铁)上非磁性覆层的厚度(如:油漆、电泳、粉未、镀锌、铬、铜、锢、珐琅、橡胶、搪瓷、防腐层,涂料等),使用简单,携带便捷,超大液晶显示屏,大字号,背光直读更清晰,采用进口优质金属材料小测头,结构精密牢固,重复性更好,性能犹佳。
仪器特点
●本仪器简洁大方、便携、外观精美、造工精细、测量精准
● 全智能触摸按键,防滑型,设计独特、新颖,人性化,结构紧密
● 采用进口优质金属小测头,性能更稳定,耐磨耐压,长寿命
● 大液晶显示屏,背光,大字号显示,任何角度读数高度清晰准确
● 测试速度快,灵敏度高,稳定性好。
● 连续测试和单次测量两种模式可选;连续测试有效降低人为误差,让测量值更精准
● 可统计最大值、最小值、平均值、测量次数,一键完成,优质,高效,便捷无限
● 大容量存储,可存贮800多个测量数据
● 可采用两种校准方式:零点校准和两点校准,两点校准更准确。
● 操作过程有蜂鸣声标示(单次测量方式)
● 自动识别铁基和非铁基底材。
● 公英制转换μm/Mil
● 低电压指示
● 手动/自动关机功能
l支持蓝牙互联,实时手机APP同步数据(须定制蓝牙版测厚仪)
DR360涂镀层测厚仪技术参数
A、测量范围:0-1250 μm
B、使用环境:温度:0℃-50℃,湿度:20%RH—90%RH,无强磁场环境下使用
C、最薄基体:0.3mm
D、测量精度:±(1%-3%)H+1.5μm
E、分辨率:0.1μm /1μm(100μm以下为0.1μm,100μ以上为1μm)
F、最小基体面积10*8mm
G、最小曲率:凸5mm;凹25mm
H、外形尺寸:130mm*70mm*24mm
I、重量:100g
J、电源:三节(7号)碱性电池
出厂清单
序号 | 物品名称 | DR360(标准配置) |
1 | 主机 一台 | √ |
2 | 标准片一套 | √ |
3 | 铁基体一块 | √ |
4 | 电池三节 | √ |
5 | 说明书一份 | √ |
6 | 合格证一份 | √ |
7 | 清洁布一张 | √ |
8 | ABS仪器包装箱一个 | √ |
9 | 可定制蓝牙版测厚仪 | 适用于蓝牙版主机(选配) |
DR360涂镀层测厚仪可定制蓝牙版:智能蓝牙版APP软件功能:1.数据同步传输到东如APP2.同步语音播报测量结果3.数据分组存储(可编辑产品名称)4.设置报警值及开启语音或震动报警功能5.实时统计最大值、最小值、平均值6.可将测量结果报表通过发送/导出保存至QQ,微信或电脑
7.测量结果查看,删除和发送记录
8.单位设置等
DR360 Coating thickness gauge ,test Magnetic thickness method, can be nondestructively measuring magnetic metal matrix ( such as: steel, iron, nickel ) on non magnetic coatings thickness ( such as: galvanized, chrome, paint, electrophoresis, enamel, rubber, powder coating, enamel, etc.)
Coating thickness characteristics
A、Fine small integrated, convenient to carry
B、 Metal probe,Simple operation, quick test speed
C、 Two test methods: a continuous test and a single measuring method
D、Four statistical functions: maximum value, minimum value, average value, the number of measurements
E、Can store 800 measurement data
F、The instrument can be connected computers communicate to read the stored data to save or print (Application of U type host )
G、Two calibration methods: zero calibration and two point calibration
H、Operation process has the buzz sound prompt ( single measurement )
I、Automatic recognition of Fe and NFe substrates
J、Low voltage indication
K、Metallic test head, wear resistance, not easy to damage
L、Manual / automatic shutdown function
technical parameters
A、Measuring range:0-1250μm
B、Using environment: 0℃-50℃ and 20%RH—90%RH,not strong magnetic place.
C、the thinnest matrix: 0.4mm
D、measurement accuracy:±(1%-3%)+1.5μm
E、resolution ratio:0.1μm /1μm
F、minimum curvature:凸bugle5mm;concave25mm
G、minimum matrix:10*10mm
H、power source:three alkaline batteries( no.7)
I、size:130mm*70mm*24mm
J、weight:100g
Guangzhou Dongru Electronic Technology Co., Ltd